Astra L4-1.8L (2009)
3. Install the upper left side center pillar.
*
Install the 3 upper center pillar clips.
Tighten the center pillar seat belt fastening bolts to 35 Nm (26 lb ft).
*
Install the cover cap.
4. Install the rear compartment side trim.
*
Install the 8 rear quarter panel clips.
-
Tighten the bolts on the upper center pillar to 35 Nm (26 lb ft).
-
Tighten the bolt to rear seat backrest to 40 Nm (30 lb ft).
-
Tighten the lower center pillar bolt to 35 Nm (26 lb ft).
*
Install the rear quarter trim cover cap front.
*
Install the seat belt striker guide bushing to rear quarter panel front.
*
Install the seat belt with striker.
*
Install the lower seat belt striker.
Tighten the lower belt striker to 35 Nm (26 lb ft).
5. Install the upper center pillar trim.
*
Guide the center pillar trim from above into the inner paneling guide front of rear quarter panel.
*
Install the upper center pillar trim.
*
Press in the expanding bolt.
Tighten the seat belt bolt to the center pillar trim to 35 Nm (26 lb ft).
*
Install the cover cap.
6. With the aid of an assistant, insert the rear seat backrest.
7. Install the rear seat backrest.
*
Guide in and position the rear seat backrest with guide pins right and left in rear quarter panel.
Tighten the 4 rear bolts to 20 Nm (15 lb ft).
*
Fold down the rear seat backrest.
*
Insert the 3 belt buckles.
Tighten the 4 front bolts to 20 Nm (15 lb ft).
8. Install the bench seat.
*
Support the 2 seats in the rear bracket.
*
Push the seat simultaneously backwards and down.
*
Bolt in the 2 brackets front.
9. Install the rear end inner paneling.
Install the 7 clips.
10. Install the additional storage trays under the load compartment carpet.
11. Install the trailer hitch ball head.
*
Thread the seat belt through the eye.
*
Insert the ball.
*
Tighten the belt.
12. Install the load compartment carpet.
13. Install the luggage shade.
*
Engage the 2 side covers in supports.
*
Install the 2 retaining cords to tailgate.