Astra L4-1.8L (2009)
20. Carefully remove the heater mat (1) from the padding.
Installation Procedure
1. Glue the heater mat to the padding.
2. Install the upholstery.
1. Position the upholstery.
2. Install the 16 padding clamps.
3. Install the upholstery all around the seat frame.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the front seat back cushion.
Tighten the 4 bolts to 35 Nm (25 lb ft).
4. Insert the seat heating wiring harness.
Install with 4 cable ties.
5. Install the airbag wiring harness.
6. Install the seat wiring harness plug.
Connect the plug.
7. Install the interior paneling.
Tighten the bolt to 2.5 Nm (22 lb in).
8. Install the outside paneling.
Tighten the 2 bolts to 35 Nm (26 lb ft).
9. Install the adjuster wheel for back seat backrest.
Clip in the adjuster wheel.
10. Install the height adjuster.
Tighten the 2 bolts to 35 Nm (26 lb ft)..
11. Install the height adjuster panel.
Clip in the panel.
12. Insert the side airbag.
Note: Note correct arrangement of wiring harness.
