Astra L4-1.8L (2009)
Connect and lock the wiring harness plug.
13. Attach the side airbag.
Tighten the 3 bolts to 5 Nm (44 lb in).
14. Install the front seat back cushion cover.
1. Install the 2 clamps.
2. Install the cover all round.
Note: Connect the wiring harness plug.
15. Install the front seat.
Insert into front guide.
16. Install the front seat at back.
Tighten the 2 bolts to 20 Nm (15 lb ft).
17. Shift the seat to starting position.
18. Install the safety belt to front seat.
Tighten the bolt to 20 Nm (15 lb ft).
19. Install the safety belt trim panel.
20. Connect the battery.
21. For programming procedures, refer to Control Module References (See: Testing and Inspection/Programming and Relearning).
