Astra L4-1.8L (2009)
Tighten to 40 Nm (30 lb ft).
6. Install the rear wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair)
7. Lower the vehicle.
8. Bleed the brake system and check for leaks. Refer to Hydraulic Brake System Bleeding (See: Brake Bleeding/Service and Repair).
9. Actuate the brake pedal repeatedly.
10. Top up the brake fluid to the MAX mark. Refer to Master Cylinder Reservoir Filling (See: Brake Master Cylinder/Service and Repair/Procedures
).
11. Adjust the parking brake. Refer to Parking Brake Adjustment (See: Parking Brake System/Adjustments).
Front Brake Caliper Mounting Plate Replacement
Front Brake Caliper Mounting Plate Replacement
Special Tools
J 28733-B /KM-6610 and KM-956-1 Front/Rear Spindle Remover
Removal Procedure
Warning: Refer to Brake Dust Warning (See: Service Precautions/Technician Safety Information/Brake Dust Warning).
Warning: Refer to Brake Fluid Irritant Warning (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Warning).
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the front wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
3. Remove the brake disc. Refer to Front Disc Brake Pads Replacement (See: Disc Brake System/Brake Pad/Service and Repair/Front Disc Brake
Pads Replacement).
4. Remove the nut from the axle shaft.
Counterhold against the wheel hub with the holding wrench J 28733-B /KM-6610 and KM-956-1.
