Astra L4-1.8L (2009)
5. Disconnect the wiring harness plug (1) for the wheel sensor.
Note: Note the installation position of wheel bearing unit and cover plate.
6. Remove the wheel bearing unit.
*
Remove the 3 bolts (2).
*
Remove the wheel bearing unit (4) with the cover plate (3) from the steering knuckle and the axle shaft.
7. Remove the cover plate from the wheel bearing unit.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
Note:
*
Note the installation position.