Astra L4-1.8L (2009)
*
Install to support.
Tighten the 3 bolts to 55 Nm (40 lb ft).
*
Install to side member.
Tighten the 3 bolts to 35 Nm (25 lb ft).
4. Raise the vehicle by its full height.
5. Remove KM-6173.
Remove the 4 bolts.
6. Remove KM-6001-A .
Loosen the 3 screwed connections.
7. Install the lower engine cover and the right engine splash guard.
8. Lower the vehicle by its full height.
9. Install the air cleaner housing. Refer to Air Cleaner Assembly Replacement (See: Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair).
10. Close the hood.
