Astra L4-1.8L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
Note: Ensure that the groove (3) engages in the recess (2).
1. Install the engine rear mount to the bracket with a new nut.
Tighten the screwed joint to 55 Nm (40 lb ft).
2. Install the engine rear mount to the front frame with new nuts.
Tighten the 2 screwed joints to 55 Nm (40 lb ft).
3. Lower the vehicle by its full height.
