Astra L4-1.8L (2009)
*
Disconnect the 2 wiring harness plugs.
*
Remove the object alarm module.
Installation Procedure
1. Install the object alarm module.
*
Insert the object alarm module.
*
Connect the 2 wiring harness plugs.
2. Insert the REC.
Install the object alarm module.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Connect the REC.
Tighten the nut to 7 Nm (62 lb in).
4. Connect the wiring harness plug for the rear electronics module (REC).
Connect the 6 wiring harness plugs.
5. Close the service flap.
6. Connect the battery.
7. For reprogramming procedures, refer to Control Module References (See: Testing and Inspection/Programming and Relearning).