Astra L4-1.8L (2009)
6. Remove the intake manifold bracket (2).
*
Disconnect the wiring harness plug of the catalytic converter control oxygen sensor.
*
Disconnect the wiring harness plug (1) from the bracket.
*
Remove the 2 bolts (3).
7. Remove the starter.
Remove the 2 bolts (1, 2).
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the starter.
Tighten the 2 bolts to 25 Nm (18 lb ft).
