Astra L4-1.8L (2009)
2. Install the intake manifold bracket.
Tighten the 2 bolts to 8 Nm (70 lb in).
*
Install the wiring harness plug into the bracket.
*
Connect the wiring harness plug for the catalytic converter control oxygen sensor.
3. Install the wiring harness to the starter.
Tighten the 2 nuts to 12.5 Nm (110 lb in).
4. Install the ground cable to the starter.
Tighten the nut to 12.5 Nm (110 lb in).
5. Lower the vehicle by its full height.
6. Connect the battery.
Install the ground connection to the ground terminal.
Tighten the nut to 12.5 Nm (110 lb in).
7. For programming procedures, refer to Control Module References (See: Testing and Inspection/Programming and Relearning).
8. Close the hood.