saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Rack and Pinion Inner Tie Rod Replacement|Page 9286 > < Rack and Pinion Inner Tie Rod Replacement|Page 9284
Page 3
background image

7. Remove the tie rods on both sides of the steering gear.

*

Remove the 2 retaining straps (1, 2).

*

Remove the 2 boots from the steering gear.

*

Remove the 2 tie rods (4) from the steering gear with KM-6004-2  .
Counterhold with an open-ended wrench on the toothed rack flat on the steering shaft side.

8. Remove the steering gear from the front frame.

*

Remove the 2 nuts (2) from the front frame.

*

Remove the 2 bolts.

*

Remove the steering gear from the front frame.

Installation Procedure

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

Rack and Pinion Inner Tie Rod Replacement|Page 9286 > < Rack and Pinion Inner Tie Rod Replacement|Page 9284