saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Front Suspension|Page 9662 > < Front Suspension|Page 9660
Page 2
background image

3. In the vehicles with disc brakes, detach the handbrake cable from the brake caliper.

*

Push down the operating lever at the brake caliper using a screwdriver.

*

Remove the handbrake cable.

*

Detach the retaining clip.

*

Pull the handbrake cable out of the bracket.

Note:  If it is not possible to pull the brake caliper with brake carrier and installed brake pads from brake disc because of brake disc wear, for
example: remove the brake pads from rear wheel brake, refer to Rear Disc Brake Pads Replacement   (See: Brakes and Traction Control/Disc
Brake System/Brake Pad/Service and Repair/Rear Disc Brake Pads Replacement). 

4. Detach the brake caliper with brake carrier from the brake backing plate. 

*

Remove the 2 brake carrier bolts from the brake carrier plate. 

*

Pull the brake caliper with brake carrier from the brake disc. 

*

Suspend the brake caliper and brake carrier from the rear spring using suitable wire.

Front Suspension|Page 9662 > < Front Suspension|Page 9660