Astra L4-1.8L (2009)
5. Remove the nozzle.
*
Disconnect the 2 retaining lugs (1).
*
Remove the spray nozzle.
Installation Procedure
Note: Ensure correct installation position. Right-Left.
1. Install the nozzle.
2. Insert the high mounted stop lamp.
*
Connect and lock the wiring harness plug.
*
Connect the wiring harness.
*
Connect the hose for the washer/wiper system.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
Note: Be careful of the wiring harness plug when installing the brake light. Start from the right hand side.
Note: The high mounted stop lamp must engage audibly.
3. Tighten the high mounted stop lamp.
4. Install the liftgate garnish molding, left and right. Refer to Liftgate Garnish Molding Replacement (Coupe) (See: Body and Frame/Interior
Moulding / Trim/Trim Panel/Service and Repair)Liftgate Garnish Molding Replacement (Sedan) (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair).
