Aura L4-2.4L (2008)
1. Position the flywheel to the crankshaft.
2. Install the NEW flywheel bolts until snug.
3. Have an assistant install the J 38122-A, and a breaker bar to the crankshaft balancer in order to prevent the flywheel from rotating when tightening
the flywheel bolts.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
4. Tighten the flywheel bolts.
Tighten the bolts to 53 N.m (39 lb ft) plus an additional 25 degrees using the J 45059.
5. Remove the J 38122-A and breaker bar.
6. Install the transaxle. Refer to Transmission Replacement (2.4L (LAT) W/ME7) (See: Automatic Transmission/Transaxle/Service and
Repair/Removal and Replacement) and Transmission Replacement (See: Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement).