ION L4-2.2L VIN F (2004)
26. Install the master cylinder and the auxiliary reservoir, as an assembly, to the vacuum brake booster.
Notice: Refer to Fastener Notice in Service Precautions.
27. Install the brake master cylinder mounting nuts.
-
Tighten the nuts to 20 Nm (15 ft. lbs.).
28. Install the brake master cylinder auxiliary reservoir mounting bolts.
-
Tighten the bolts to 10 Nm (89 inch lbs.).
29. Secure the master cylinder pipes to the 6-position pipe clip along the frame rail.
30. Position the master cylinder pipes to the master cylinder ports.
31. Remove the caps from the brake pipe ends.
32. Connect the brake pipe fittings (1) at the master cylinder.
Tighten first design ISO flare to 19 Nm (14 ft. lbs.)
Tighten second design double inverted flare to 18 Nm (13 ft. lbs.)
