ION L4-2.2L VIN F (2004)
7. Remove the connector position assurance (CPA) from the seat belt pretensioner-LF connector.
8. Disconnect the seat belt pretensioner-LF connector from the vehicle harness connector.
9. Remove the garnish molding from the upper lock pillar.
10. Remove the CPA from the roof rail module-left connector.
11. Disconnect the roof rail module-left connector from the vehicle harness connector.
ENABLING PROCEDURE
1. Remove the key from the ignition switch.
2. Connect the roof rail module-left connector to the vehicle harness connector.
3. Install the CPA to the roof rail module-left connector.
4. Install the garnish molding to the upper lock pillar.