ION L4-2.2L VIN F (2004)
Heater Hose: Service and Repair
Heater Hose Replacement-Outlet
HEATER HOSE REPLACEMENT - OUTLET
TOOLS REQUIRED
SA9111E Hose Clamp Pliers
CAUTION: With a pressurized cooling system, the coolant temperature in the radiator can be considerably higher than the boiling point of the
solution at atmospheric pressure. Removal of the surge tank cap, while the cooling system is hot and under high pressure, causes the solution to
boil instantaneously with explosive force. This will cause the solution to spew out over the engine, the fenders, and the person removing the cap.
Serious bodily injury may result.
REMOVAL PROCEDURE
1. Remove the surge tank cap.
2. Raise and support the vehicle. Refer to Vehicle Lifting.