ION L4-2.2L VIN F (2004)
INSTALLATION PROCEDURE
1. Install new sealing washers on the condenser tube and evaporator hose fittings.
2. Install the condenser tube and evaporator hose to the TXV.
3. Install the TXV nut.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nut to 20 N.m (15 lb ft).
4. Install new seal washer to the compressor hose.
5. Install the compressor hose and nut to the evaporator hose.
Tighten
Tighten the nut to 20 N.m (15 lb ft).