ION L4-2.2L VIN F (2004)
Stabilizer Bushing: Service and Repair
Note: The content of this article / image reflects the changes called out by TSB - 05-03-08-008.
Stabilizer Shaft Insulator Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the front wheels.
3. Remove the stabilizer shaft mounting clamp bolts and clamps from both sides of the vehicle.
4. Remove the bushings from the stabilizer shaft.
Installation Procedure
1. Install the stabilizer bushings on the stabilizer shaft with the cut line facing rearward.
