ION L4-2.2L VIN F (2004)
3. Install the lower control arm ball stud to steering knuckle pinch bolt and nut.
-
Tighten the nut to First Pass: 50 Nm (37 ft. lbs.) and reverse nut 3/4 turn. Second Pass: 50 Nm + 30°.
4. Install the outer tie rod to the steering knuckle.
-
Tighten the nut to 60 Nm (44 ft. lbs.).
5. Install the wheel bearing, brake rotor, brake caliper and front wheels.
6. Lower the vehicle.
7. Road test the vehicle in order to verify alignment. If a lead or pull is present refer to Measuring Wheel Alignment.