ION L4-2.2L VIN F (2004)
Notice: Refer to Fastener Notice in Service Precautions.
4. Tighten the valve body assembly-to-transaxle case bolts in the sequence shown.
^
Tighten the bolts to 10 Nm (89 inch lbs.).
5. Install a new valve body fluid passage cover gasket (38).
6. Install a new control valve body fluid passage cover(37).
7. Install the control valve body fluid passage cover bolts (31).
^
Tighten the bolts to 10 Nm (89 inch lbs.).
Important: Apply transaxle fluid to the new fluid temperature sensor O-ring.
8. Install a new O-ring (32) into the groove of the transaxle fluid temperature sensor (36).
9. Install the temperature fluid sensor (36) into the valve body.