ION L4-2.2L VIN F (2004)
![background image](/saturn/ion/l4-2.2l_vin_f/Page-1400004.png)
Important: Note the orientation of the manual valve before connecting the manual valve link assembly.
5. Connect the manual valve link assembly to the manual valve.
6. Install the manual shaft detent assembly and bolt on the control valve body assembly.
^
Tighten the bolt to 11 Nm (8 ft. lbs.).
7. Connect the connector for the input and output speed sensor assembly to the control valve body assembly.
8. Slide the grey locking clip in order to lock the connector in place.
9. Install the control valve body cover.