ION L4-2.2L VIN F (2004)
Seals and Gaskets: Service and Repair
Automatic Transaxle - AF23-5
Drive Axle Shaft Seal Replacement
^
Tools Required
-
J 43068 Axle Seal Installer
-
J 45000 Seal Remover
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the drive axle assembly.
3. Using J 45000, remove the wheel drive shaft oil seal from the transmission case.
Installation Procedure
Important: The seal must install flush with the case flange.
1. Using the J 43068, install the front wheel drive shaft oil seal into the transmission case.
2. Install the drive axle assembly.
3. Lower the vehicle
4. Check the transaxle fluid level.