L200 L4-2.2L VIN F (2002)
32. Install blower motor housing. Housing rib must fit into slot in case. Snap left and right clips into place and install screws.
Torque:
Blower Motor Housing Screws: 1.0 N.m (9 in-lbs)
33. Install connector duct to HVAC module and install screw.
Torque:
HVAC Module Duct Screws: 1.0 N.m (9 in-lbs)
34. Install lower insulator into forward edge of case then stretch to hook on barbs.