L200 L4-2.2L VIN F (2002)
Cruise Control Module: Service and Repair
CRUISE CONTROL MODULE AND THROTTLE CABLE
REMOVAL (WITH FACTORY EQUIPPED NON-ADJUSTABLE CABLE)
1. Ignition Off.
2. Remove cruise control module to bracket bolts leaving bracket attached to frame rail.
3. Remove cruise control throttle cable clip attached to front of dash.
4. Pull cruise control module up behind power brake booster.
5. Disconnect cruise control module harness connector.
6. Disconnect cruise control throttle cable snap from throttle body cam.
7. Cut the bead off the end of the cruise control throttle cable at the throttle body cam end.
8. Unclip cruise control throttle cable form both attachment clips.
9. Disconnect cruise control throttle cable from module by rotating cable 1/4 turn counter-clockwise at module.
10. Remove cable from connecting strap.
11. Remove and discard the cut cruise control throttle cable and replace with an adjustable cruise control throttle cable.
REMOVAL (ADJUSTABLE CABLE)
1. Ignition Off.
2. Remove cruise control module to bracket bolts leaving bracket attached to frame rail.
3. Remove cruise control throttle cable clip attached to front of dash.
4. Pull cruise control module up behind power brake booster.
5. Disconnect cruise control module harness connector.
(1) Cruise Control Throttle Cable
(2) Adjuster (shown here, actually closer to module)
(3) Cable Snap
(4) Cable Head
6. Disconnect cruise control throttle cable snap from throttle body cam.
7. Unclip cruise control throttle cable from both attachment clips.
