L200 L4-2.2L VIN F (2002)
8. Disconnect cruise control throttle cable from module by rotating cable 1/4 turn counter-clockwise at module.
9. Remove cable from connecting strap.
10. Remove cruise control throttle cable.
INSTALLATION
NOTE: Once factory cable has been removed it cannot be reused. Replace factory cable with adjustable type cable. An initial adjustment of the new
cable will be necessary. Afterwards, the lash learn capability of the cruise control module will compensate for future adjustments. For more
information on the lash learn capability see "Cruise Control System Description".
IMPORTANT: Do not twist connecting strap during installation.
1. Connect cruise control throttle cable to cruise control module connecting strap.
2. Install cruise control throttle cable to cruise control module by rotating 1/4 turn clockwise.
3. Install cruise control module with throttle cable into frame rail bracket and install attachment bolts.
Torque:
Cruise Control Module-to-Frame Rail Bracket Bolts: 10 N.m (89 in-lbs)
