L300 V6-3.0L VIN R (2001)
1. Install the rear seat back front cover onto the rear seat back beam.
2. Position the rear seat back beam rear cover locking tabs over the rear seat back beam.
3. Push at the attaching clip location and snap the beam cover into place.
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Install the rear seat back beam rear cover fasteners.
Tighten the rear seat back beam rear cover fasteners to 2 Nm (18 lb in).
5. Install the rear seat back beam rear cover fasteners.
Seat Back Beam Cover Replacement (Rear)
Seat Back Beam Cover Replacement (Rear)
Removal Procedure