L Series V6-3.0L VIN R (2004)
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the throttle body nuts.
Tighten the throttle body nuts to 8 N.m (71 lb in).
3. Attach the vacuum lines, the EVAP hose, and the coolant lines to the throttle body.
4. Install the EGR pipe bolt.
Tighten the EGR pipe bolt to 25 N.m (18 lb ft).
5. Install the intake plenum bolts.
Tighten the intake plenum bolts to 8 N.m (71 lb in).
6. Connect the intake plenum-to-runner universal clamp pliers using the J 43914. If the clamps are damaged, replace with service screw type clamps.
7. Connect the throttle body electrical connector.