LW2 V6-3.0L VIN R (2000)
![background image](/saturn/lw2/v6-3.0l_vin_r/Page-2503005.png)
18. Remove pressure transducer from suction/liquid line assembly.
INSTALLATION
NOTE: Use only mineral oil to lubricate O-ring seals. Use of PAG oil will cause premature corrosion of joints.
1. Install pressure transducer to suction/liquid line assembly.
Torque: 7 N.m (62 in-lbs)
2. Position suction/liquid line assembly into vehicle around engine mount.
IMPORTANT: Always install new O-rings to reduce refrigerant leaks.