LW2 V6-3.0L VIN R (2000)
9. Install suction/liquid line assembly into clamp at front of dash.
10. Install suction/liquid line assembly clamp at mount area.
Torque: 5 N.m (44 in-lbs)
CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED. TO HELP AVOID PERSONAL
INJURY WHEN A VEHICLE IS ON A HOIST, PROVIDE ADDITIONAL SUPPORT FOR THE VEHICLE ON THE OPPOSITE END
FROM WHICH COMPONENTS ARE BEING REMOVED.
11. Raise vehicle.
12. Lubricate seal washer and install suction/liquid line assembly to suction pipe and hand start nut.