LW2 V6-3.0L VIN R (2000)
5.
Measure front and rear vehicle curb trim height.
6.
After taking the initial rear camber reading, the rear of the vehicle.
7.
Loosen the rear lower control arm to knuckle bolt and move the knuckle in for more positive (+) or out for more negative Camber. It may be
helpful to scribe around the bolt head as a reference before making adjustments.
8.
Tighten the rear lower control arm to knuckle bolt but do not torque at this time.
9.
Lower and jounce vehicle, then re-check Camber.
10.
Repeat steps 1 through 4 until camber is within 0.25 degrees of desired setting.