LW2 V6-3.0L VIN R (2000)
Clockspring Assembly / Spiral Cable: Service and Repair
Removal and Installation
SIR Coil Assembly
REMOVAL
1. Position vehicle with front wheels pointed straight ahead and steering wheel centered.
NOTE: Always align the front wheels to the straight ahead position when removing or installing a coil assembly.
If a coil is removed without the wheels in the straight ahead position, the same coil may be installed if the steering shaft and coil hub have not rotated.
2. Disable the SIR system. (Refer to: Air Bag(s) Arming and Disarming procedures.)
3. Remove driver inflator module.
4. Remove steering wheel.
5. Remove upper steering column cover, and lower steering column cover attachment.
6. Remove ignition switch bezel and remove lower cover.