Sky L4-2.4L (2007)
The protector tape, P/N 25833317, will need to be unrolled and straightened prior to installation. The protector should not overlap the triangular
protector when installed correctly.
Install the left triangular protector, P/N 25833315, to the underside of the hood with the flat part of the protector up against the upper headlight bracket
(1) and the triangular point angled toward the lower headlight bracket (2).
The protector tape will need to be curved around the inner fender while working out any bubbles or air pockets that may form.
Install P/N 25833317 to the left underside hood area next to the triangular protector, starting at the lower front edge of the inner fender wheelhouse
opening on the hood (1), working upwards with the tape.
Install the right triangular protector, P/N 25833316, to the underside of the hood with the flat part of the protector up against the upper headlight bracket
and the triangular point angled toward the lower headlight bracket.
Install P/N 25833317 to the right underside hood area next to the triangular protector, starting at the lower front edge of the inner fender wheelhouse
opening on the hood, working upwards with the tape.
Close the hood.
Opel GT and Saturn Sky
