Sky L4-2.4L (2007)
Flywheel: Service and Repair
Engine Flywheel Replacement
Tools Required
*
J 38122-A Harmonic Balancer Holder
*
J 45059 Angle Meter
Removal Procedure
1. Remove the automatic transmission, if equipped.
2. Remove the clutch, if equipped.
3. Using the J 38122-A, hold the crankshaft balancer.
Important: It may be necessary to remove the chamfer (bevel) from the edge of an 18 mm socket in order to get full engagement on the
thin-headed flywheel bolts.
4. Remove the flywheel bolts, if equipped with a automatic transmission.
Important: Do not orientate the flywheel to the crankshaft. It is balanced separately from the engine.
5. Remove the flywheel.
6. Clean the thread adhesive from the flywheel bolt holes. Use a nylon bristle brush to clean the holes in the crankshaft.
