saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

ABOUT US
M/T - Clutch May Not Release In Cold Temps|Page 10448 > < M/T - Clutch May Not Release In Cold Temps|Page 10446

Sky L4-2.4L (2007)

Page 2
background image

7. Remove the flywheel bolts, if equipped with a manual transmission.
8. Remove the flywheel.
9. Clean the thread adhesive from the flywheel bolt holes. Use a nylon bristle brush to clean the holes in the crankshaft.

Installation Procedure

1. Install the flywheel, if equipped with a manual transmission.

Notice:  Refer to  Fastener Notice.

2. Install the flywheel bolts.

Tighten the bolts to 53 N.m (39 lb ft) plus an additional 25 degrees using the  J 45059.

M/T - Clutch May Not Release In Cold Temps|Page 10448 > < M/T - Clutch May Not Release In Cold Temps|Page 10446