SL L4-1.9L DOHC VIN 7 (1992)
4.
For driver seat on SL2, SW2, SC and SC2, use a side window crank removal tool (or equivalent) and remove the lumbar adjuster handle.
5.
Push the seatback to the full-forward position.
6.
Disengage J-strip (interlock strip) at bottom of seatback assembly.
7.
Pull cover up to expose hog rings in foam pad.
8.
Remove hog rings.
9.
Remove headrest bushing by pinching the inside ends and forcing the headrest bushing out from the inside.
10.
Remove seatback cover and seatback foam pad from seatback frame.