SW L4-1.9L DOHC VIN 7 (1993)
WATER PUMP INSTALLATION
1. Install a new gasket on the pump flange.
IMPORTANT: A small dab of silicone or gasket sealant will be required at the outer edges of bolt holes to hold the gasket in place during pump
installation.
2. Install the pulley loosely on the water pump hub. Do not install the pulley bolts.
3. Install the water pump and pulley on the engine.
IMPORTANT: A small mark (bump) is located next to one attachment bolt. The mark is positioned at the 11 o'clock position during installation of
the water pump.
Torque the bolts in the sequence shown.