SW1 L4-1.9L SOHC VIN 8 (1996)
Torque: 3 N.m (27 in-lbs)
10. Install trim panel to door frame, push to seat.
Water Liner
REMOVAL
1. Remove front door trim panel.
2. Remove energy absorbing foam from door structure.
CAUTION: IF ENERGY ABSORBING FOAM IS REMOVED FROM DOOR IT MUST BE REPLACED WITH AN NEW PART. IF
OMITTED FROM THE DOOR THE VEHICLE WILL NOT MEET FEDERAL MOTOR VEHICLE SAFETY STANDARDS (FMVSS),
SUBJECTING THE RETAILER TO POSSIBLE CIVIL PENALTIES FOR MAKING THE VEHICLE INOPERATIVE TO THE FMVSS,
AND INCREASING THE RISK OF INJURY TO THE VEHICLE OCCUPANTS.
INSTALLATION
1. Remove tape backing and install to door structure.
2. Reinstall door trim panel.
Window Regulator Handle Replacement
REMOVAL
1. Disengage manual window regulator handle clip with a standard handle tool, or by working a cloth back and forth between handle and the bearing
plate.
2. Remove handle.
INSTALLATION
1. Install window regulator handle clip on handle.
2. Install bearing plate and handle in a forward and slightly up position with the window in a closed position.
