SW1 L4-1.9L SOHC VIN 8 (1996)
7.
Disconnect electrical connectors.
8.
Remove existing decklid latch and discard.
9.
Cut out center of interior release handle template and place over interior release handle.
10.
Select hole locations on template for appropriate vehicle type and model year.
11.
Mark hole location(s) on release handle as shown on template.
12.
Drill 3 mm (1/5 in.) hole at marks on handle.
13.
Install decklid lock cylinder rod to lock cylinder and new latch.
a. For Coupes, install new lock cylinder rod (included in kit).
^
1991-1996 model year Coupes require short lock rod.
^
1997-1999 model year Coupes require long lock rod.
