saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

97-T-25A > < Sunroof Sunshade - Binds/Rattles In Tracks|Page 9966
Page 1
background image

Sun Shade: Customer Interest
Sunroof - Sunshade Material Separates From Sunroof

BULLETIN NO.: 98-T-47A

ISSUE DATE: January, 1999

GROUP/SEQ. NO.: Body - 13

CORPORATION NO.: 99-08-110-002

SUBJECT:
Sunroof Sunshade Fabric Material Separates From Sunroof Sunshade at Front and Rear Edges (Re-attach Sunroof Sunshade Fabric)

Due to changes in the subject line, this bulletin is being revised and supercedes bulletin 98-T-47, which should be discarded.

MODELS AFFECTED:
1996-1999 Saturn Sedans and 1997-1999 Saturn Coupes equipped with factory installed sunroof (CF5 option)

CONDITION:
Under normal operating conditions, sunroof sunshade fabric begins to separate from sunroof sunshade.

CAUSE:
Improper adhesion between sunroof sunshade fabric and sunroof sunshade.

CORRECTION:
Re-attach fabric using the following procedure.

PROCEDURE:

1.

Remove sunroof sunshade from vehicle. Refer to "Sunroof Sunshade" in the Body/Repair Service Manual.

2.

Place sunroof sunshade on a clean bench.

3.

Remove old adhesive using a razor blade.

4.

Cover areas that should not have adhesive applied to them.

5.

Apply 3M(R) General Trim Adhesive (P/N 8088), or equivalent, to attaching side of fabric and attaching side of sunroof sunshade. Follow
manufacturer's instructions for drying and application.

6.

Install sunroof sunshade in vehicle. Refer to "Sunroof Sunshade" in the Body/Repair Service Manual.

PARTS REQUIREMENTS:

8088

3M(R) General Trim Adhesive

CLAIM INFORMATION:

To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System as shown.

97-T-25A > < Sunroof Sunshade - Binds/Rattles In Tracks|Page 9966