saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Sunroof - Switch Assembly Removal & Installation Update|Page 10027 > < Sunroof - Will Not Open or Close, May Be Intermittant|Page 10021
Page 1
background image

Sunroof / Moonroof Switch: All Technical Service Bulletins
Sunroof - Switch Assembly Removal & Installation Update

BULLETIN NO.: 96-T-54

ISSUE DATE: October, 1996

GROUP/SEQ. NO.: Body-17

CORPORATION NO.: 681610

SUBJECT:
New Service Procedure for Removal and Installation of Sunroof Switch Assembly

MODELS AFFECTED: 
1991 - 1997 Saturns equipped with factory installed power sunroofs (CF5)

PURPOSE: 
The sunroof switch assembly removal and installation procedure in the Saturn service manuals state that the headliner must be removed to gain access to
the sunroof switch assembly. This information is incorrect. In the future, for sunroof switch removal and installation, use the procedure included with this
bulletin.

PROCEDURE

Sunroof Switch Assembly

Removal

1.

Remove map lamp bezel

2.

Depress tabs on sunroof switch assembly to remove from overhead console.

3.

Disconnect wire connector from sunroof switch assembly and remove sunroof switch assembly.

Sunroof - Switch Assembly Removal & Installation Update|Page 10027 > < Sunroof - Will Not Open or Close, May Be Intermittant|Page 10021