SW1 L4-1.9L SOHC VIN 8 (1996)
30.
Fill the cooling system with the mixture.
31.
Run the engine for five minutes.
32.
Drain the cooling system.
33.
Repeat Steps 29 through 32 until all oil residue is remove from system.
34.
Fill the cooling system with clean water.
35.
Let the engine run five minutes.
36.
Drain the cooling system completely.
37.
Install new engine thermostat.
38.
Install cylinder block drain plug.
Torque: 35 N.m (26 ft-lbs)
39.
Close radiator drain plug.
IMPORTANT:
The vehicle must be level when filling with coolant.
