SW1 L4-1.9L SOHC VIN 8 (1996)
6. Remove the thermostat element using the service tool provided with the replacement element.
CAUTION: The thermostat will not function correctly once it is contacted by oil. If oil is found in the cooling system, it must be flushed and the
thermostat's cartridge replaced.
7. Inspect the thermostat components for damage, seat deterioration, etc.
INSTALLATION
1. Replace the thermostat element using the service tool provided.
IMPORTANT: Make sure the element's retaining tangs are properly seated in the two legs and the element piston is correctly positioned in the
water inlet housing.
2. Install a new O-ring on the inlet housing:
