SW1 L4-1.9L SOHC VIN 8 (1996)
1. Install a new gasket on the pump flange.
IMPORTANT: A small dab of silicone or gasket sealant will be required at the outer edges of bolt holes to bold the gasket in place during pump
installation.
2. Install the pulley loosely on the water pump hub. Do not install the pulley bolts.
3. Install the water pump and pulley on the engine.
IMPORTANT: A small mark (bump) is located next to one attachment bolt. The mark is positioned at the 11 o'clock position during installation
of the water pump.
4. Install pulley on pump hub. The pulley can be held using a strap wrench, block of wood or hammer handle.
