SW1 L4-1.9L SOHC VIN 8 (1996)
4.
Remove the two transaxle strut bracket fasteners and remove the transaxle strut bracket.
5.
Install bench-assembled damper kit by securing it in place with the two trans axle strut bracket fasteners
Torque: 54 N.m (40 ft-lbs)
6.
Finger start forward vertical battery tray bolt through the damper kit's upper bracket. Tighten loosely to secure bracket location while making sure
that the horizontal hole in the upper bracket aligns with its mating hole in the midrail.
7.
Raise vehicle on a hoist.
8.
Remove left front road wheel.
9.
Locate the hole in the midrail that was used on earlier vehicles to secure the battery tray with the forward horizontal battery tray bolt.