SW1 L4-1.9L SOHC VIN 8 (1996)
10.
Locate the forward hole that was used in first design vehicles to secure the battery tray to the midrail. Then using a metric or SAE dimension
stepped uni-bit, enlarge the hole to 17 mm or 11/16 in.
IMPORTANT:
This hole will be used to gain access to the inside of the midrail for installation of the M8 x 20 mm bolt.
11.
To install M8 x 20 mm bolt, use an extension and a 10 mm socket. Use a magnetic socket or secure the bolt in the socket with RTV.
