SW1 L4-1.9L SOHC VIN 8 (1996)
INSTALLATION
1. Lubricate with R-12 mineral oil and install new O-rings on evaporator pipes. Remove protective covers from TXV.
2. Install TXV on evaporator and torque bolts.
Torque: 10 N.m (89 in-lbs)
NOTICE: Use only R-12 Refrigerant oil (mineral) to lubricate O-rings. Use of R-134a (PAG) oil will cause premature corrosion of fitting joints.
3. Lubricate with R-12 mineral oil and install new O-rings on suction hose and liquid line.
4. Install liquid line to TXV Install and torque bolt.
Torque: 25 N.m (19 ft-lbs)
5. Install suction hose to TXV Install and torque bolt.
Torque: 25 N.m (19 ft-lbs)
6. Install air cleaner cover and air induction hose.
7. Evacuate, charge, and leak test A/C system.
8. Run system performance test.