SW1 L4-1.9L SOHC VIN 8 (1996)
EGR Valve: Service and Repair
Vacuum Schematic
REMOVAL
1. Turn ignition Off.
2. Remove the air intake tube.
3. Disconnect the linear EGR valve wiring harness terminal.
4. Remove the linear EGR valve attachment bolts and valve assembly.
NOTE: The linear EGR valve should not be soaked in any solvent; otherwise damage to the electrical solenoid can result.
NOTE: Remove all loose deposits from the EGR inlet passage, otherwise they could clog the EGR valve.
5. Inspect the cylinder head, linear EGR valve and adapter passages for excessive carbon deposits. Deposits can be removed using a screwdriver or
305-330 mm (12-13 in.) length of odometer cable.
6. Clean the EGR valve mounting surfaces and inspect for scoring and cracks.
INSTALLATION