SW1 L4-1.9L SOHC VIN 8 (1996)
1. Install new EGR valve gasket.
NOTE: Make sure gasket is installed correctly or a vacuum leak will occur.
2. Install EGR valve.
3. Install EGR valve attachment bolts.
Linear EGR valve to cylinder head Torque to 25 N.m (19 ft-lbs)
4. Connect linear EGR valve wiring harness connector.
5. Inspect air inlet tube. Attach air inlet and tighten clamp.
6. Install fresh air hose.
7. Start engine and inspect for exhaust gas leaks and diagnostic codes.