SW1 L4-1.9L SOHC VIN 8 (1996)
NOTE: Use care in removing fuel rail assembly to prevent damage to the electrical connector terminals and spray tips. The fuel injector is
serviced as a complete assembly only. Since it is electrical, it should not be immersed in any cleaner.
Areas Of Possible Contact
12. Remove fuel rail assembly.
NOTE: Enough space exists between the intake manifold and cam cover to remove the fuel rail as an assembly.
a. Carefully pull rail back and upward to remove injectors from the intake manifold ports.
b. Move rail back against intake manifold runners.
c. Rotate rail so injectors point upward.
d. Move the rail against the power steering pump.
e. Lift the #1 injector and remove the rail from between the cylinder head and intake manifold.
NOTE: Whenever the fuel rail is removed for service, the injectors must be removed and upper and lower injector 0-rings must be replaced.
